Machine Vices
Bench Vices
Clamps & Clamping Elements
Wood Working Tools
Angle Plates & 
Magnetic Tools
Hand Tools
Milling Machine Vice (Deluxe) Model
APEX Code 745 / 745P
Milling Machine Vice (Deluxe) Model
745 : (Swivel Model)
745P : (Plain Model)
(Size : 4", 6", 8")
Features :
- Tilt Lock Machine Vice design is beamlike with two vertical and horizontal rails connected to the base.
- You can hold piece parts in the most immobile state possible.
- That the movable jaw does not lift off the bed.
- That the body is rigid, and that a minimal amount of bending stresses are created in the clamping area.
- That deflection of the stationary jaw is minimized.
- Totally enclosed toughened Screw.
- The bed is guaranteed flat and parallel .0001 per inch.
- Graded Cast Iron dully stress relieved body. Tool steel hardened & ground Jaws.
- In addition to the rigid design characteristics, a large heavy nut is drawn up against the machined ways on the inside vice as the movable jaw is drawn down. This creates a heavy mass of material under compression and extremely resistant to bending stresses.
- 4 Jaws Plate positions allowing extra capacity with the jaw plates in the outside position.
| Specifications | |||
| Size in Inches | 4 | 6 | 8 |
| Width of Jaws (in mm) | 100 | 150 | 200 |
| Depth of Jaws (in mm) | 48 | 60 | 65 |
| Opening of Jaws (in mm) | 100 | 150 | 200 |
| Length Overall (in mm) | 325 | 520 | 575 |
| Height Overall (in mm) (Plain Vice) | 90 | 115 | 130 |
| Height Overall (in mm) (Swivel Vice) | 125 | 150 | 170 |
| Width Overall (in mm) (Plain Vice) | 160 | 225 | 275 |
| Width Overall (in mm) (Swivel Vice) | 170 | 245 | 300 |
| Tenon Slot Size (in mm ) | 16 | 20 | 20 |
| Weight (app. in Kgs.) Code 745 | 18 | 47 | 80 |
| Weight (app. in Kgs.) Code 745P | 12 | 34 | 60 |